Miter Box and Saw Set - 12 inch Mitre Box with saw included for Daily use
4 sold in last 24 hours
- ☘【Accuracy】The cam-shaped pins can be twist and lock with honeycomb base to secure work for accurate cuts.
- ☘ 【4 Cut Angles】Vertical slots in the miter box allow for the wood to be cut at 45 degrees, 22 1/2 degrees, and 90 degrees. and bevel cut at 45 degrees.
- ☘【Durable】This miter box is made of high-impact polystyrene, sturdy built 1.5lb better than normal. and The reinforced saw blade is made of premium steel, double-sided mechanical grinding.
- ☘【Safe】Minor injuries are the most you can expect when properly using a manual miter saw
- ☘【Quiet】Little noise will not bother others compared to power saws
Tags |
Estimated shipping
Select a product to estimate shipping.Key Features
Sharp blade
Reinforced saw blade is made of premium steel, double-sided mechanical grinding.
Ergonomic Design
The handle is made of TPR plastic for a comfortable grip and save labor
The saw blade angle is adjustable according to your need
Cam pins
The cam pins can be twist and lock with honeycomb base to secure work for accurate cuts.
Easy to fix
The vertical corner can be placed on the edge of the table for better control
1. MEASURE AND MARK THE CUT
Measure the length of wood you need for your project. Mark it with a pencil, then draw a straight line across the board with a square.Mark the waste side with an “X”
2. PLACE THE WOOD IN THE MITER BOX
Lay the wood inside the miter box.This particular miter box comes with peg clamps to hold the board tight against the back. Line up the waste side of the cut line with the side of the slot, not right down the middle!
3. LINE THE BLADE UP WITH YOUR MARK AND CUT
Insert the saw into the slots for the angle you plan to cut. If you start sawing at full force, the blade will jump and you'll get a jagged edge at the top of the cut. Instead, run the blade lightly over the board a few times to score the surface and break those wood fibers.
4. FINISH THE CUT
Once you have a groove in the board, you can finish the cut using more effort. Don't try to force the saw down. Just let the teeth do the work!
Product details
| Main Specification | |
|---|---|
| Bileşenleri dahil | Backsaw or Cam-shaped Pins |
| Üretici yapımcı | ACEgoes |
| Savaş Materyalleri | Naylon |
| Boyut L x W x H | 13.78"L x 5.91"W x 3.94"H |
| Yüzey Önerisi | Wood Wood |
| Kostüm uzunluğu | 12 Inches |
| Dişlerin Sayısı | 10 |
| Brand Brand Brand | ACEgoes |
| Madde Sayısı | 1 1 1 |
| Güç Kaynağı | Hand Powered |
| Renkli Renk | Portakal |
| Blade Material | Sk5 |
| Blade Şekil | Rectangular |
| Ağırlık | 2 kilo |
| Product information | |
| Garanti Türü | Genişletilmiş Genişletilmiş Genişletilmiş |
| Technical Details | |
| Üretici Bölüm Numarası | MBS1221 |
| Cutting Angle | 90 Degrees |
| Item details | |
| Model Numarası | MBS1221 |
| Üretici Garanti Açıklama | 5-Year Manufacturer's Warranty And Lifetime Service |
| Others | |
| 1. | Reinforced Steel Back Saw for Accurate Cutting or Preset 90 45 22.5 and 0 Degree Cuts or 4-1/2in x 3in (W x H) Cutting Capacity |
| Ürün Türü | Miter Saws |
| Ürünün diğer özel özellikleri | Bevel Capability |